In addition to these parts you will need Low Voltage Wire (RB509/RB509R)to run from the transformer that plugs into an outlet within 1000' to the control box. We sell it by the foot or in a 1000' roll. This wire is not included since each installation's needed footage is different. Click here for information and to order this wire.

These are some other items you may be needing to complete your installation of the PRO 3000/3200 and 4000/4200 operators depending on your particular situation: Click on the link supplied to go to the product for details and to order.

Some of these items could be needed depending on your circumstances.

1) Column mount adaptors (349IH) to mount the operator arms to a flat surface. The adaptor supplied with the kit is for round posts. Click here

2) Push to Open Bracket (R4KPTO) Required on some Push to open installations that need a greater distance to achieve the safe gate and operator clearance. If used two would be needed for a dual gate application. Dual Gate Installation uses one SW4000 plus one SW4200. Click here

3) Of course the gate and posts which you will supply.

4) You may need a rail or piece of angle iron to allow the arm to attach near the center of the height of the gate. If the gate has a rail or surface already that will allow a small bracket to attach there you will not need this.

In addition to these items there are many accessories you may wish to use to customize your new automatic opening gate to fit your exact needs. Choose from entry and exit accessories, powering accessories, locking and hardware accessories. Click here to see a list of options available. 

This is not intended to be a complete list of everything you might need. If you have any further questions regarding your installation please contact us.